Traxxas Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur gear

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2.12" (54mm)
Density: .23" (6mm)

This thing compliments the above talked about thing.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Elements for both nitro and electric Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

This thing compliments the above talked about thing.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building

CONSISTS OF:
One slipper pressure plate
One slipper hub

REQUIRES:
Setup onto vehicle.

Here is another thing that compliments the thing being talked about.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Totally put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping areas from dirt
Connects to the differential with one screw pin
Works on the front or rear, right or left of vehicle

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

REQUIRES:
Installing on chassis

You will certainly like this item if you have the item above discussed.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto vehicle

Numerous others have actually acquired this thing together with the thing that you are currently reviewing.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

CONSISTS OF:
One 58T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto vehicle

Numerous others have actually acquired this thing together with the thing that you are currently reviewing.

Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

CONSISTS OF:
One 62T 0.8 metric pitch spur gear

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2" (51mm)
Density: .23" (6mm)

The listed below thing likewise pairs actually well with the thing being talked about.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

CONSISTS OF:
One 68T 0.8 metric pitch spur gear

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2.16" (55mm)
Density: .23" (6mm)

Get this thing to enhance the one you read around.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)