Traxxas Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper hub

NEEDS:
Setup onto car.

Regularly purchased with the product that you are currently reading about.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

INCLUDES:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

The below product additionally pairs really well with the product being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Numerous others have purchased this product along with the product that you are currently reading about.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

Get this product to boost the one you read about.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

This product is often purchased with the above discussed product.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might likewise be described as coverplate screws.

Numerous others have purchased this product along with the product that you are currently reading about.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building and construction

INCLUDES:
2 different plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet thickness: 2mm

You will certainly love this product if you have the product previously stated.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Setup on to slipper shaft
Staying clutch pieces

Get this product to boost the one you read about.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 54T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car

The below product additionally pairs really well with the product being reviewed.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car