Traxxas 58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car

The below thing also sets truly well with the thing being gone over.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Parts for both nitro and electric Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Recommendations

NEEDS:
Disassembly of slipper clutch

Here is another thing that praises the thing being gone over.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color
.8 metric pitch

INCLUDES:
One 56T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car

Here is a excellent thing that numerous others have purchased the exact same time.

12T Pinion Gear 32P

This is a 12 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 12 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of two which are utilized on the E-Maxx double motor
    set-up.

Here is another thing that praises the thing being gone over.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Size: 3mm

The below thing also sets truly well with the thing being gone over.



This is the DuraTrax NiMH 8.4V 5000mAh Onyx Stick Battery Pack
with Traxxas Connector.

FEATURES:
Perfect sport pack for cars, trucks and boats

INCLUDES:
DuraTrax NiMH 8.4V 5000mAh Onyx Stick Battery with Traxxas
    Connector

NEEDS:
NiMH suitable battery charger such as the Duratrax Onyx series
Female Connector to Molex Male Connector Adapter, TRAC3061 (if using
    Onyx battery charger)

SPECIFICATIONS:
Capability: 5000mAh
Number of Cells in Series: 7
Ranked Voltage: 8.4V
Min. Release Voltage: 6.3V
Maximum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Traxxas port
Pack Measurements: 6.1 x 1.8 x 0.90" (155 x 45 x 23mm)
Weight: 16 oz (455 g)
Variety of Welds per Connection: 6 spot welds
Cell Size: Sub-C

Want another excellent thing to match the above stated thing?

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum construction

INCLUDES:
One slipper pressure plate
One slipper hub

NEEDS:
Installation onto car.

This thing praises the above gone over thing.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one needed).