Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Setup on the automobile

SPECS:
Diameter: 2.16" (55mm)
Thickness: .23" (6mm)

The listed below product likewise sets truly well with the product being gone over.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building

INCLUDES:
One slipper pressure plate
One slipper center

REQUIRES:
Setup onto automobile.

Here is a great product that several others have actually purchased the same time.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Parts for both nitro and electrical Revo and Maxx trucks

INCLUDES:
Two Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

Here is an additional product that praises the product being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above gone over product.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building

INCLUDES:
Two different plasting holders
One disk-shaped magnet
Two 8mm screws
Two 10mm screws

SPECS:
Magnet size: 5mm
Magnet thickness: 2mm

You will like this product if you have the product earlier discussed.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

REMARKS:
These might likewise be referred to as coverplate screws.

Here is a great product that several others have actually purchased the same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 metric pitch

INCLUDES:
One 56T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile

This product praises the main item right here.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile

Get this product to boost the one you are reading about.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Setup on the automobile

SPECS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

Here is an additional product that praises the product being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Changes missing out on or damaged hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and putting wheel hubs in
    recessed area of axle carriers (4932).