Traxxas Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 62T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECS:
Diameter: 2" (51mm)
Thickness: .23" (6mm)

Below is an additional item that compliments the item being discussed.

Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Parts for both nitro and electric Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

This item compliments the above discussed item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will like this thing if you have the thing above discussed.

Hub Carriers

These are the Center Carriers for the
    Associated ProLite 4x4 Short Course Truck, ASCD71**.

FUNCTIONS:
Plastic building and construction

INCLUDES:
2 Center Carriers

NEEDS:
Four 3/16 x 3/8" ball bearings, DTXC1423

Below is a fantastic item that several others have actually bought at the very same time.

17-T Pinion Gear Compatible With 32-Pitch

This is the Traxxas 17 Tooth 32 Pitch Pinion Gear.

FEATURES:
Hardened steel building and construction
0.8 metric pitch, compatible with 32 pitch spur gears
Fits 0.196" (5mm) diameter motor shafts

INCLUDES:
17 Tooth 32 Pitch Pinion Gear with Set Screw

This item compliments the main item right here.



These are the Ball Cups for the
    Associated ProLite 4x4 Short Course Truck, ASCD71**.

FUNCTIONS:
Plastic building and construction
Threads onto and anchors suspension and steering linkages

INCLUDES:
Fourteen Ball Cups

Get this item to improve the one you read around.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

Below is an additional item that compliments the item being discussed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper center

NEEDS:
Installation onto automobile.

Want an additional fantastic item to match the above stated item?

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

This item compliments the above discussed item.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
Replaces worn or damaged lower chassis braces

INCLUDES:
Right and left lower chassis braces

NEEDS:
Installation on the E-Maxx

SPECS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This item compliments the above discussed item.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Replaces damaged receiver boxes
Constructed of black plastic

INCLUDES:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.