Traxxas Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Components for both nitro and electric Revo and Maxx trucks

SUCHES AS:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

Below is a terrific thing that many others have actually purchased the exact same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building

SUCHES AS:
One slipper pressure plate
One slipper hub

REQUIRES:
Setup onto vehicle.

This thing is regularly bought with the above pointed out thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above reviewed thing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2.16" (55mm)
Density: .23" (6mm)

You will certainly love this thing if you have the thing previously pointed out.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2.12" (54mm)
Density: .23" (6mm)

This thing is regularly bought with the above pointed out thing.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

SUCHES AS:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Setup on to slipper shaft
Remaining clutch pieces

Want another terrific thing to match the above pointed out thing?



This is a pair of Pro-Line Badlands 2.8" All Terrain Tires
installed on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the back of
    the 2WD Jato, Stampede and Rustler and the front and back of the
    Traxxas Stampede 4x4
Wheels built of nylon with a molded-in beadlock ring for scale
    look, six spoke design
M2 medium compound Badlands 2.8" tires have motorcross style tread
    with oversize lugs for optimum performance in all surface
    conditions

SUCHES AS:
Two Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECS:
Size: 4.95" (126mm)
Width: 2.10" (53mm)

This thing compliments the above reviewed thing.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These may also be described as coverplate screws.