Traxxas Spur Gear 50T Vxl

This is the optional 50T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One 50T Spur Gear

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Diameter: 27.4mm (1.1")
Inner Diameter: 5.5mm (0.22")

Lots of others have purchased this thing along with the thing that you are presently reviewing.

Spur Gear 45T Vxl

This is the 45T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One 45T Stimulate Gear

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Diameter: 24.75mm (0.97")
Inner Diameter: 5.5mm (0.22")
Width: 7mm (0.28")

Lots of others have purchased this thing along with the thing that you are presently reviewing.

Spur Gear 55T

This is the optional 55T Stimulate Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One 55T Stimulate Gear

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Diameter: 30mm (1.2")
Inner Diameter: 5.5mm (0.22")
Width: 7.2mm (0.28")

Below is a great thing that lots of others have purchased the very same time.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Suitable replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal construction

CONSISTS OF:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Pearly whites: 28
Pitch: 48

This thing praises the main item right here.

Slipper Clutch, Complete (Incl

    This is the Total Slipper Clutch for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
One Slipper Clutch Hub
One Clutch Pad
One Spring
One 3mm Locking Nut
1.5x6mm Pin

NEEDS:
Installation on the vehicle

This thing praises the main item right here.

2.5Mm X 15 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are ideal for areas where a screwmotorist won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
been available in a range of diameters and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

This is a wonderful addition to the thing presently being gone over.



WATERPROOF DIGITAL MICRO SERVO .11/69@6V IDEAL FOR TRAXXAS 1/16

This thing praises the above gone over thing.

Half Shafts, Center Front (1),

These are the Front/Rear Center Half Shafts for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Center Half Shaft
One Rear Center Half Shaft
4 U-Joints

NEEDS:
Installation on the vehicle

This thing praises the main item right here.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Installation on the vehicle