Traxxas Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Setup on the car

Frequently purchased with the thing that you are currently checking out.

Differential Assembly, Complet

This is the Total Differential Assembly for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for use on 1/10 scale vehicles.

FEATURES:
Steel and nylon building and construction

INCLUDES:
One Total Differential Assembly

Several others have purchased this thing together with the thing that you are currently checking out.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction, black in color

INCLUDES:
One Wing
One Decal Set

REQUIRES:
Setup on the car

SPECS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This thing praises the above reviewed thing.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Setup on the car

Right here is an additional thing that praises the thing being reviewed.

Cover Plates, Differential (Fr

These are the Front and Back Differential Cover Plates
for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front and One Rear Diff Cover Plate
Two O-Rings
Two Gaskets
3 2x14mm Button Head Screws

REQUIRES:
Setup on the car

Get this thing to boost the one you read about.

Shim Set For Differential, Four Shims, .324 X .409 X .005

This is the Diff Shim Set for the Associated 18T.

FEATURES:
Steel building and construction

INCLUDES:
4 shims and direction sheet

REQUIRES:
Setting up on differential shaft

SPECS:
Size: inner 8mm, outer 10mm

Several others have purchased this thing together with the thing that you are currently checking out.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Setup on the car

This thing is regularly purchased with the above discussed thing.

Bulkhead, Rear (Left & Right H

This is the Back Bulkhead for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction, black in color

INCLUDES:
Two Back Bulkhead Sections
4 3 x 10mm Button Head Screws
One 2.5 x 22mm Socket Head Cap Screw

REQUIRES:
Setup on the car

Right here is an additional thing that praises the thing being reviewed.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Setup over front diff assembly

This is a superb addition to the thing currently being reviewed.

1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Wheelie Bar
One 2x14mm Cap Head Screws
3 2x8mm Cap Head Screws
Direction Sheet

REQUIRES:
Setup at rear of chassis