Traxxas Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction, black in color

INCLUDES:
One Wing
One Decal Set

NEEDS:
Setup on the vehicle

SPECS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

Get this product to improve the one you are reading around.

Wing Mount/ Hardware (1/16 E-R

This is the Wing Mount for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Wing Mount
Two 2.9x9.75mm Button Head Screws
Two 2.9x7.95mm Button Head Screws
Two 2.35x11.75mm Cap Head Screws
Two 2.35x17.8mm Cap Head Screws

NEEDS:
Setup on the vehicle

Want one more great product to compliment the above pointed out product?

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

INCLUDES:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Setup on the vehicle

This product praises the above talked about product.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Setup on the vehicle

This is a great enhancement to the product presently being talked about.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Battery Compartment Door
Two Vents

NEEDS:
Setup on the vehicle

Below is one more product that praises the product being talked about.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Guiding Servo Guards
One Steering Servo Cover Plate

NEEDS:
Setup on the vehicle

This product praises the above talked about product.

Suspension Arm Set, Front (Inc

This is the Front Suspension Arm Set for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

NEEDS:
Setup on the vehicle

This product praises the above talked about product.



This is a basic replacement Antenna Tube with Cap from Dubro.
This product can be utilized anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Red plastic construction

INCLUDES:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Nothing. This is a direct fit part for any boat, automobile, etc. that uses
    a basic size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

Get this product to improve the one you are reading around.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for use with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Suitable with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

INCLUDES:
TQ 2.4GHz 3-Channel Micro Receiver

SPECS:
Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)