Traxxas Suspension Arm Set, Front (Inc

This is the Front Suspension Arm Set for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

REQUIRES:
Installation on the car

The below item also sets truly well with the item being talked about.

Wing Mount/ Hardware (1/16 E-R

This is the Wing Mount for usage on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Wing Mount
2 2.9x9.75mm Button Head Screws
2 2.9x7.95mm Button Head Screws
2 2.35x11.75mm Cap Head Screws
2 2.35x17.8mm Cap Head Screws

REQUIRES:
Installation on the car

This is a superb addition to the item presently being talked about.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction, black in color

CONSISTS OF:
One Wing
One Decal Set

REQUIRES:
Installation on the car

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This item is often gotten with the above stated item.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel constructed pivot balls
Black nylon pivot ball caps

CONSISTS OF:
Four Pivot Balls
Four Pivot Ball Caps

REQUIRES:
Installation on the car's suspension

This item compliments the main item right here.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Installs
Four 2.5x18mm Cap Head Screws

REQUIRES:
Installation on the car

Lots of others have gotten this item in addition to the item that you are presently reviewing.

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction
Silver in color

CONSISTS OF:
2 2x46mm Pins
Four 2x14mm Pins

REQUIRES:
Installation through suspension parts

Lots of others have gotten this item in addition to the item that you are presently reviewing.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
Four Front/Rear Toe Hyperlinks
Eight Hollow Balls

REQUIRES:
Installation on the car

SPECIFICATIONS:
Length: 86mm (3.4")
Size: 5mm (0.20")