Traxxas Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Installs
4 2.5x18mm Cap Head Screws

NEEDS:
Setup on the vehicle

Below is a excellent item that numerous others have bought at the same time.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Setup over front diff assembly

This item praises the above talked about item.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

NEEDS:
Setup on the vehicle

Want an additional excellent item to enhance the above mentioned item?

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Grey in color

SUCHES AS:
One Chassis

NEEDS:
Setup on vehicle

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This item praises the above talked about item.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Setup on the vehicle

Below is a excellent item that numerous others have bought at the same time.

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction
Silver in color

SUCHES AS:
Two 2x46mm Pins
4 2x14mm Pins

NEEDS:
Setup through suspension components

Get this item to improve the one you read about.

Servo, Micro, Waterproof

This is the Water resistant Micro Servo for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Water resistant
Blue nylon case

SUCHES AS:
One Water resistant Micro Servo with standard adapter

NEEDS:
Setup on the vehicle

SPECS:
Length: 29.5mm (1.2")
Width: 14mm (0.55")
Height: 29mm (1.1")

This item is frequently purchased with the above mentioned item.



WATERPROOF DIGITAL MICRO SERVO .11/69@6V IDEAL FOR TRAXXAS 1/16

Want an additional excellent item to enhance the above mentioned item?



This is the Parallel Battery Connection Wire Harness for use
on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Traxxas High Power Connectors
Integrates mAh of connected batteries for longer run time

SUCHES AS:
One Wire Harness (two Traxxas Male connectors and one Traxxas female
    adapter)
Instruction manual

NEEDS:
Setup between batteries and ESC

This is a great addition to the item presently being talked about.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for use with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Compatible with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

SUCHES AS:
TQ 2.4GHz 3-Channel Micro Receiver

SPECS:
Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)