Traxxas Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
Two 2x46mm Pins
Four 2x14mm Pins

REQUIRES:
Setup through suspension components

Here is a great item that many others have actually bought at the very same time.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Guiding Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Setup on the automobile

This item compliments the main item right here.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Two front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Setup over front diff assembly

This is a great enhancement to the item presently being reviewed.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Installs
Four 2.5x18mm Cap Head Screws

REQUIRES:
Setup on the automobile

Here is a great item that many others have actually bought at the very same time.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Setup on the automobile

Many others have actually purchased this item along with the item that you are presently reviewing.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Setup on automobile

SPECIFICATIONS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

The listed below item also pairs really well with the item being reviewed.

Bulkhead Tie Bars, Front & Rea

These are the Front and Rear Bulkhead Tie Bars for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Aluminum construction
Blue in color

CONSISTS OF:
One Front Bulkhead Tie Bar
One Rear Bulkhead Tie Bar
One 2.5x6mm Cap Head Screw

REQUIRES:
Setup on the automobile

This is a great enhancement to the item presently being reviewed.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May likewise be utilized in any automobile where this size bearing is needed

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

This item compliments the main item right here.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")