Traxxas Wing Mount/ Hardware (1/16 E-R

This is the Wing Mount for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Wing Mount
2 2.9x9.75mm Button Head Screws
2 2.9x7.95mm Button Head Screws
2 2.35x11.75mm Cap Head Screws
2 2.35x17.8mm Cap Head Screws

REQUIRES:
Installation on the vehicle

Frequently gotten with the item that you are presently reading about.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building, black in color

CONSISTS OF:
One Wing
One Decal Set

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

Numerous others have gotten this item in addition to the item that you are presently reading about.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Installation on the vehicle

This item is frequently gotten with the above pointed out item.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Installation on the vehicle

Frequently gotten with the item that you are presently reading about.

Suspension Arm Set, Front (Inc

This is the Front Suspension Arm Set for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

REQUIRES:
Installation on the vehicle

This is a wonderful enhancement to the item presently being discussed.



This is a conventional replacement Antenna Tube with Cap from Dubro.
This product can be used anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Red plastic building

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Nothing. This is a direct fit part for any boat, vehicle, etc. that utilizes
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

The below item additionally sets actually well with the item being discussed.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for use with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Compatible with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

CONSISTS OF:
TQ 2.4GHz 3-Channel Micro Receiver

SPECIFICATIONS:
Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)