Traxxas Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for usage on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Battery Compartment Door
2 Vents

NEEDS:
Installation on the vehicle

Below is another thing that praises the thing being talked about.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

NEEDS:
Installation on the vehicle

This thing is frequently bought with the above pointed out thing.

Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for usage on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon construction
Black in color
Fits left or best

CONSISTS OF:
One Fully Assembled Driveshaft Assembly

NEEDS:
Installation on the vehicle

The listed below thing likewise sets really well with the thing being talked about.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Grey in color

CONSISTS OF:
One Chassis

NEEDS:
Installation on vehicle

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

You will certainly like this product if you have the product previously stated.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
2 front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Installation over front diff assembly

You will certainly like this product if you have the product previously stated.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite construction
Red in color

CONSISTS OF:
4 Pushrods
Eight Hollow Balls

NEEDS:
Installation on the vehicle

SPECS:
Length: 70mm (2.8")
Size: 5mm (0.20")

Often bought with the thing that you are presently reading about.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
2 Steering Servo Guards
One Steering Servo Cover Plate

NEEDS:
Installation on the vehicle

Often bought with the thing that you are presently reading about.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction, black in color

CONSISTS OF:
One Wing
One Decal Set

NEEDS:
Installation on the vehicle

SPECS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")