Traxxas Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for use on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building and construction
Black in color
Fits left or best

CONSISTS OF:
One Fully Put together Driveshaft Assembly

REQUIRES:
Installation on the car

This product compliments the above reviewed product.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Installation on the car

This product compliments the above reviewed product.

Half Shafts, Left Or Right (1/

These are the Left or Right Half Shafts for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two Internal Splined Half Shafts
Two External Splined Half Shafts
Four Metal U-Joints

REQUIRES:
Installation on the car

This product is frequently purchased with the above discussed product.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Battery Compartment Door
Two Vents

REQUIRES:
Installation on the car

Often purchased with the product that you are presently reviewing.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel constructed pivot balls
Black nylon pivot ball caps

CONSISTS OF:
Four Pivot Balls
Four Pivot Ball Caps

REQUIRES:
Installation on the car's suspension

Often purchased with the product that you are presently reviewing.

Wheel Hubs, Hex (4)/ Axle Pins

    These are the Wheel Hubs and Axle Pins for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Four Wheel Hubs
Four 1.5x8mm Axle Pins

REQUIRES:
Installation on the car

SPECIFICATIONS:
Hex Size: 12mm

This product is frequently purchased with the above discussed product.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Installation on the car

SPECIFICATIONS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")

Here is a excellent product that numerous others have bought at the same time.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
Four Front/Rear Toe Hyperlinks
8 Hollow Balls

REQUIRES:
Installation on the car

SPECIFICATIONS:
Length: 86mm (3.4")
Size: 5mm (0.20")

Want another excellent product to enhance the above discussed product?

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for use on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
Two Rear Rocker Arm Posts
Two Front Rocker Arm Posts
8 Nylon Bearings

REQUIRES:
Installation on the car

Want another excellent product to enhance the above discussed product?

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon building and construction
Grey in color

CONSISTS OF:
One Output Equipment
One Top Decrease Equipment
One Center Decrease Equipment
One Bottom Decrease Equipment
Guideline sheet

REQUIRES:
Installation on the servo