Traxxas Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")

Many others have bought this item in addition to the item that you are presently checking out.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be utilized in any vehicle where this size bearing is required

CONSISTS OF:
Two Ball Bearings

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

Want an additional wonderful item to enhance the above stated item?

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
Two 2x46mm Pins
Four 2x14mm Pins

NEEDS:
Installation through suspension components

This is a wonderful enhancement to the item presently being gone over.

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for usage on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon building
Grey in color

CONSISTS OF:
Two Rear Rocker Arm Posts
Two Front Rocker Arm Posts
8 Nylon Bearings

NEEDS:
Installation on the vehicle

Want an additional wonderful item to enhance the above stated item?

Differential Assembly, Complet

This is the Total Differential Assembly for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for usage on 1/10 scale vehicles.

FEATURES:
Steel and nylon building

CONSISTS OF:
One Total Differential Assembly

The below item also pairs actually well with the item being gone over.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Installation on the vehicle

Want an additional wonderful item to enhance the above stated item?

Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for usage on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building
Black in color
Fits left or ideal

CONSISTS OF:
One Completely Assembled Driveshaft Assembly

NEEDS:
Installation on the vehicle