Traxxas Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for use on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon construction
Black in color
Fits left or best

SUCHES AS:
One Completely Assembled Driveshaft Assembly

REQUIRES:
Installation on the car

This product compliments the above gone over product.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

SUCHES AS:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Installation on the car

This product compliments the above gone over product.

Half Shafts, Left Or Right (1/

These are the Left or Right Half Shafts for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Two Internal Splined Half Shafts
Two External Splined Half Shafts
Four Metal U-Joints

REQUIRES:
Installation on the car

This product is often gotten with the above stated product.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Battery Compartment Door
Two Vents

REQUIRES:
Installation on the car

Frequently gotten with the product that you are currently checking out.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel constructed pivot balls
Black nylon pivot ball caps

SUCHES AS:
Four Pivot Balls
Four Pivot Ball Caps

REQUIRES:
Installation on the car's suspension

Frequently gotten with the product that you are currently checking out.

Wheel Hubs, Hex (4)/ Axle Pins

    These are the Wheel Centers and Axle Pins for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Four Wheel Centers
Four 1.5x8mm Axle Pins

REQUIRES:
Installation on the car

SPECS:
Hex Size: 12mm

This product is often gotten with the above stated product.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

SUCHES AS:
Two Ball Bearings

REQUIRES:
Installation on the car

SPECS:
Outer Diameter: 12mm (0.47")
Inner Diameter: 8mm (0.31")
Width: 3.5mm (0.14")

Below is a wonderful product that numerous others have actually bought at the exact same time.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Links for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Red in color

SUCHES AS:
Four Front/Rear Toe Links
Eight Hollow Balls

REQUIRES:
Installation on the car

SPECS:
Length: 86mm (3.4")
Diameter: 5mm (0.20")

Want another wonderful product to enhance the above stated product?

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for use on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon construction
Grey in color

SUCHES AS:
Two Rear Rocker Arm Posts
Two Front Rocker Arm Posts
Eight Nylon Bearings

REQUIRES:
Installation on the car

Want another wonderful product to enhance the above stated product?

Gear Set (For 2080 Micro Water

This is the Servo Gear Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FEATURES:
Nylon construction
Grey in color

SUCHES AS:
One Output Gear
One Top Decrease Gear
One Center Decrease Gear
One Bottom Decrease Gear
Guideline sheet

REQUIRES:
Installation on the servo