Traxxas Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Battery Compartment Door
Two Vents

REQUIRES:
Setup on the car

Below is another item that compliments the item being discussed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Setup on the car

This item is often gotten with the above discussed item.

Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for use on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon construction
Black in color
Fits left or best

CONSISTS OF:
One Totally Assembled Driveshaft Assembly

REQUIRES:
Setup on the car

The below item also sets actually well with the item being discussed.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Setup on car

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

You will certainly like this thing if you have the thing previously mentioned.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Setup over front diff assembly

You will certainly like this thing if you have the thing previously mentioned.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite construction
Red in color

CONSISTS OF:
4 Pushrods
8 Hollow Balls

REQUIRES:
Setup on the car

SPECS:
Length: 70mm (2.8")
Size: 5mm (0.20")

Often gotten with the item that you are presently checking out.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Setup on the car

Often gotten with the item that you are presently checking out.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction, black in color

CONSISTS OF:
One Wing
One Decal Set

REQUIRES:
Setup on the car

SPECS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")