Traxxas Spur Gear 45T Vxl

This is the 45T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One 45T Stimulate Gear

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Outer Size: 24.75mm (0.97")
Inner Size: 5.5mm (0.22")
Width: 7mm (0.28")

You will certainly enjoy this product if you have the product above mentioned.

Spur Gear 50T Vxl

This is the optional 50T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One 50T Spur Gear

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Outer Size: 27.4mm (1.1")
Inner Size: 5.5mm (0.22")

Below is a fantastic thing that many others have purchased the exact same time.

Spur Gear 55T

This is the optional 55T Stimulate Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One 55T Stimulate Gear

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Outer Size: 30mm (1.2")
Inner Size: 5.5mm (0.22")
Width: 7.2mm (0.28")

Want an additional fantastic thing to compliment the above pointed out thing?

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .69" (17.5mm)

The below thing also sets actually well with the thing being reviewed.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FUNCTIONS:
Suitable replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal construction

INCLUDES:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Teeth: 28
Pitch: 48

This thing compliments the above reviewed thing.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale car applications
Prewired with Traxxas high existing connector

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capacity: 1300mAh
Release Score: 25C continuous
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER take apart or customize pack electrical wiring in any method or puncture cells
NEVER put on combustible products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm