Traxxas Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Car, TRAD42**.

FEATURES:
Molded plastic building
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Car

This is a amazing addition to the item presently being talked about.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FEATURES:
Solidified steel building
Fits 0.196" (5mm) diameter motor shafts
Number of teeth and pitch marked on gear for easy identification

INCLUDES:
18T Pinion Gear with Set Screw

SPECIFICATIONS:
Number of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

Often acquired with the item that you are presently reviewing.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building with composite plastic rod ends and pressed-in
    ball links

INCLUDES:
2 each; Shock Shafts with Rod Ends and Ball Hyperlinks

This is a amazing addition to the item presently being talked about.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
2 electrical fans lower motor temperature levels as much as 30 degrees
Molded plastic shroud, black in color
One year restricted service warranty through Castle Creations starting at date
    of purchase

INCLUDES:
2 Fans, Shroud, 2 Zip Ties and Wire Lead

SPECIFICATIONS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

Several others have acquired this item in addition to the item that you are presently reviewing.

Bumper Mount, Front/ Bumper Support, X-Maxx

This is the Bumper Mount and Front Bumper Support
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building

INCLUDES:
One each; Bumper Mount and Front Bumper Support

You will enjoy this item if you have the item above discussed.

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Set for the Constant Velocity Driveshafts
    used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building
Changes the pins and inserts that connects the #7750 consistent
    velocity driveshaft to the #7753 stub axle

INCLUDES:
2 each, Pins and Inserts

You will enjoy this item if you have the item above discussed.



This is the Double Cooling Fan Y-Harness from Novak.

FEATURES:
Allows 2 cooling fans equipped with JST plugs to be installed onto
    Novak ESCs for greater cooling capability

INCLUDES:
Double Cooling Fan Y-Harness from Novak

SPECIFICATIONS:
Total Length: 3.6" (91mm) not consisting of connectors

This item praises the above talked about item.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronics
    and extend life of motor or ESC
Thirty day restricted service warranty starting at date of purchase-valid
    in the United States only

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Connector

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Want an additional fantastic item to enhance the above stated item?

Body, Fits X-Maxx (Clear, Trimmed, Requires Painting) W/ Window

This is the optional Clear Body for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded from clear polycarbonate plastic
Allows X-Maxx motorists to create their own customized paint plans

INCLUDES:
Clear Body
Body Trim Decal Sheet and Window Masks

REQUIRES:
Polycarbonate safe spray or brush-on paint

SPECIFICATIONS:
Length: 27.7" (705mm)
Width: 9.2" (234mm) behind front wheels, narrowest point
11" (279mm) at rear wheels, largest point
Height: 7.1" (180.3mm)