Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FUNCTIONS:
Solidified steel building and construction
Fits 0.196" (5mm) diameter motor shafts
Variety of teeth and pitch stamped on gear for simple identification

INCLUDES:
18T Pinion Gear with Set Screw

SPECS:
Variety of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

You will like this thing if you have the thing above mentioned.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
2 electric fans lower motor temperature levels as much as 30 degrees
Formed plastic shroud, black in color
One year limited service warranty through Castle Creations starting at date
    of purchase

INCLUDES:
2 Fans, Shroud, 2 Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

This product praises the main item here.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Vehicle, TRAD42**.

FUNCTIONS:
Formed plastic building and construction
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Vehicle

Want an additional terrific product to match the above discussed product?

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Kit for the Continuous Velocity Driveshafts
    used on the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Steel building and construction
Changes the pins and inserts that links the #7750 consistent
    velocity driveshaft to the #7753 stub axle

INCLUDES:
2 each, Pins and Inserts

Right here is an additional product that praises the product being discussed.

Male Jst Style Connectors (4)

This is a pack of four male JST design ports. These are unassembled, and can be used to repair a bad JST adapter lead, or to build your own JST leads.

ProTek R/C is an AMain.com brand.

You will like this thing if you have the thing above mentioned.



This is the Double Cooling Fan Y-Harness from Novak.

FEATURES:
Permits 2 cooling fans equipped with JST plugs to be installed onto
    Novak ESCs for greater cooling capability

INCLUDES:
Double Cooling Fan Y-Harness from Novak

SPECS:
Total Length: 3.6" (91mm) not consisting of ports

Regularly gotten with the product that you are presently checking out.



Get the most out of your 1/10 scale vehicle!
Designed for people who want to push their brushless 1/10 scale vehicles to the limitation, this THREE battery lets you make the most of your power system. Features a huge capability for prolonged runtimes, and a 50C score for lots of power. Competitively priced, this lipo is an excellent mix of features and value.
Specifications

Application(s): 1/10 scale vehicles, trucks, and buggies
Discharge Port: Traxxas-type
Balance Port: JST-XH
Weight: 350 g
Measurements: 133 x 42 x 27 mm

The below product additionally pairs really well with the product being discussed.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronic devices
    and prolong life of motor or ESC
Thirty day limited service warranty starting at date of purchase-valid
    in the United States just

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Port

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)