Hot Racing Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronics
    and lengthen life of motor or ESC
Thirty day limited service warranty starting at date of purchase-valid
    in the United States only

CONSISTS OF:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Port

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Numerous others have acquired this product together with the product that you are currently checking out.



This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Allows two cooling fans geared up with JST plugs to be installed onto
    Novak ESCs for higher cooling ability

CONSISTS OF:
Dual Cooling Fan Y-Harness from Novak

SPECIFICATIONS:
Overall Length: 3.6" (91mm) not including connectors

Right here is a excellent product that several others have bought at the same time.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
2 electrical fans lower motor temperatures as much as 30 degrees
Molded plastic shroud, black in color
One year limited service warranty through Castle Creations starting at date
    of purchase

CONSISTS OF:
2 Fans, Shroud, two Zip Ties and Wire Lead

SPECIFICATIONS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

You will certainly enjoy this item if you have the item just above pointed out.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FUNCTIONS:
Solidified steel building and construction
Fits 0.196" (5mm) size motor shafts
Number of teeth and pitch marked on gear for easy recognition

CONSISTS OF:
18T Pinion Gear with Set Screw

SPECIFICATIONS:
Number of Teeth: 18
Pitch: 1.0 metric
Pressure Angle: 20°

This product praises the above discussed product.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Automobile, TRAD42**.

FUNCTIONS:
Molded plastic building and construction
1.0 metric pitch

CONSISTS OF:
50T Spur Gear for the Traxxas XO-1 On-Road Automobile

This product praises the above discussed product.

Male Jst Style Connectors (4)

This is a pack of four male JST design connectors. These are unassembled, and can be used to repair a bad JST connector lead, or to construct your very own JST leads.

ProTek R/C is an AMain.com brand.