Traxxas Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to connect backwards
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Protect, positive locking spring crammed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Instruction sheet

REQUIRES:
Soldering wires to the metal pins

This is a fantastic enhancement to the product presently being reviewed.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programming capability through Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for usage in nearly every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
Four magnet, four pole rotor for greater torque
1.4" diameter slotted stator
Easily removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Change, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery connector of modeler's option

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)

Get this product to enhance the one you are reading around.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD brief course racing or backyard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link compatible (Field Link Portable Programmer Vehicle Card
    (CSEM6300) required, not included)
Proportional brake with reverse lockout
Water resistant*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Directions

REQUIRES:
Battery connector of modeler's option

SPECS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery connector
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

COMMENTS:
*Not planned for operation while submerged in liquid. If device is
    run in wet conditions, wash with fresh water to get rid of dirt
    or corrosives, then totally dry unit.
Maximum recommended car weight is 6.5lbs (2.95kg)