Traxxas Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FEATURES:
Fastens to bulkhead and assists to support axle carriers
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Securing to chassis

REMARKS:
For the 3.3 version just.

Want an additional terrific thing to match the above pointed out thing?

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle carriers and shocks
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Securing to chassis

REMARKS:
For the 3.3 version just. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Right here is an additional thing that compliments the thing being reviewed.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Right here is an additional thing that compliments the thing being reviewed.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

NEEDS:
2 packages needed to complete truck

This thing is often bought with the above pointed out thing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Right here is a terrific thing that numerous others have actually bought at the same time.

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls fit into the axle carriers at each wheel
    The pivot ball cap bushings fit in between the pivot balls
and the aluminum caps.

FEATURES:
Replaces stock pivot balls and pivot ball cap bushings.
Pivot balls are made of steel, pivot ball cap bushings are made of
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Putting pivot ball cap bushings in between the pivot
    balls and aluminum caps.

The below thing likewise pairs really well with the thing being reviewed.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

NEEDS:
Other shock parts

SPECS:
Diameter Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Right here is a terrific thing that numerous others have actually bought at the same time.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
use on the Traxxas Revo series.

FEATURES:
Nylon Building and construction
Black in Color
Allows for Oversized Bearing utilize

CONSISTS OF:
One Left Axle Provider
One Right Axle Provider
4 Dust Boot Retainers
2 Bearing Spacers

NEEDS:
Setup