Traxxas Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building

INCLUDES:
8 pins

REQUIRES:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

REMARKS:
These are enough hinge pins for the entire vehicle.

Right here is an additional item that compliments the item being talked about.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon mix building, black in color
Locknuts utilized at the chassis and skid plate mounting holes to
    securely lock bulkheads in place, reducing the possibility of breakage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This item compliments the above talked about item.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FUNCTIONS:
Made of RULON

INCLUDES:
Twelve pegs ***Colors may vary from picture***

SPECS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Get this item to improve the one you are reading about.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in place
Gray in color, constructed of solidified plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Attaching to skidplate and differential

REMARKS:
For the 3.3 version just.

This item compliments the main item below.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FUNCTIONS:
Connect to and safeguards chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

REQUIRES:
Setting up on chassis with 4 3x12mm countersunk machine screws
    (not consisted of, utilize TRAC2552

REMARKS:
For the 3.3 version just. For the original T-Maxx Skidplate, order
    TRAC4037.

You will certainly enjoy this item if you have the item just above pointed out.

Steering Bellcranks E/T Maxx

    This is a Set of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
These bellcranks bolt to the chassis and the bellcrank posts connect
to the guiding turnbuckles.

FEATURES:
Replaces stock guiding bellcranks.
All components are plastic, except for the shoulder screws which are
    steel.

INCLUDES:
2 guiding bellcranks
4 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Connecting bellcranks to the chassis and connecting drag link to the
    guiding turnbuckles.

Get this item to improve the one you are reading about.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing or harmed hex wheel centers
Centers are made from molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and positioning wheel centers in
    recessed area of axle carriers (4932).