Traxxas Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle providers and shocks
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Securing to chassis

COMMENTS:
For the 3.3 variation only. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Below is a great thing that numerous others have actually purchased the same time.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FEATURES:
Fastens to bulkhead and helps to support axle providers
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Securing to chassis

COMMENTS:
For the 3.3 variation only.

You will certainly love this product if you have the product just above stated.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel building and construction
Silver in color

CONSISTS OF:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This thing is regularly purchased with the above discussed thing.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Instruction sheet

NEEDS:
2 packages had to complete truck

Want one more great thing to compliment the above discussed thing?

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in place
Gray in color, built of solidified plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Securing to skidplate and differential

COMMENTS:
For the 3.3 variation only.

This thing compliments the above talked about thing.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building and construction

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

NEEDS:
Other shock parts

SPECIFICATIONS:
Diameter Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Below is a great thing that numerous others have actually purchased the same time.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
use on the Traxxas Revo series.

FEATURES:
Nylon Building
Black in Color
Allows for Oversized Bearing utilize

CONSISTS OF:
One Left Axle Provider
One Right Axle Provider
Four Dust Boot Retainers
2 Bearing Spacers

NEEDS:
Installation

Want one more great thing to compliment the above discussed thing?

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls suit the axle providers at each wheel
    The pivot ball cap bushings fit in between the pivot balls
and the aluminum caps.

FEATURES:
Replaces stock pivot balls and pivot ball cap bushings.
Pivot balls are made from steel, pivot ball cap bushings are made from
    plastic.

INCLUDES:
Four pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle providers and into the
    suspension arms. Placing pivot ball cap bushings in between the pivot
    balls and aluminum caps.