Traxxas Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock containing the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

NEEDS:
Other shock components

SPECS:
Diameter Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below item additionally sets truly well with the item being reviewed.

Ultra Shock Body Long Grey (2)

These are the Long Shock Bodies for the Traxxas Ultra Shocks.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
2 ultra shock bodies (long)

NEEDS:
Setup

SPECS:
Length: 1.45" (37mm)
Diameter: .51" (13mm)

This is a fantastic addition to the item currently being reviewed.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild set for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This item praises the main item right here.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and best steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Get this item to boost the one you read around.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle carriers and shocks
Black in color, constructed of hardened plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Fastening to chassis

COMMENTS:
For the 3.3 variation only. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

This item praises the above reviewed item.

Body Ultra Shock Xxl Grey (2)

These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
used on the Traxxas T-Maxx 3.3.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
(2) Bodies

NEEDS:
Setup

SPECS:
Length: 1.777" (45.1mm)
Diameter: 0.521" (13.2mm)

This item is regularly purchased with the above mentioned item.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
place over the shock body and the piston heads that manage the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston head for higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    2 3 hole piston head covers

NEEDS:
Disassembly of shock to set up parts.

You will certainly love this thing if you have the thing earlier mentioned.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Right here is a fantastic item that many others have actually bought at the very same time.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Outlaw, Stampede and Rustler.

FEATURES:
Metal building, black and silver in color

CONSISTS OF:
2 rear stub axles and pins

SPECS:
Length: 1.65" (42mm)
Diameter: .51" (13mm) at largest point