Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

REQUIRES:
Assembly onto Car

Want another fantastic item to enhance the above pointed out item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Installation on the vehicle

The listed below item likewise sets really well with the item being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above gone over item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

REQUIRES:
Installation on the vehicle

Lots of others have purchased this item together with the item that you are presently reading about.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Black and Silver in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 61mm Front Tie Rods
4 Rod Ends
4 Hollow Balls

REQUIRES:
Assembly onto Car

You will like this thing if you have the thing earlier mentioned.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

Here is another item that compliments the item being gone over.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

REQUIRES:
Installation on the vehicle

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will like this thing if you have the thing earlier mentioned.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

REQUIRES:
Installation on the vehicle

This item compliments the above gone over item.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Front Suspension Arm
One Right Front Suspension Arm

REQUIRES:
Assembly onto Car

Lots of others have purchased this item together with the item that you are presently reading about.



This is an optional Pro-Line ProTrac Suspension Set Front Arms
for usage on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building, black in color
Increases forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
Two front arms
One Proline decal

REQUIRES:
Installation onto vehicle