Traxxas 49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the vehicle

This item is often bought with the above discussed item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

NEEDS:
Setup on the vehicle

The listed below item likewise pairs really well with the item being talked about.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the vehicle

Want one more great item to compliment the above discussed item?

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Used on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

This item is often bought with the above discussed item.



This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon construction, black in color
Increases forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
Two rear arms
One Proline decal

NEEDS:
Setup onto vehicle

This item is often bought with the above discussed item.



This is an optional Pro-Line ProTrac Suspension Set Front Arms
for usage on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon construction, black in color
Increases forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
Two front arms
One Proline decal

NEEDS:
Setup onto vehicle

Below is a great item that many others have bought at the very same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

You will enjoy this item if you have the item just above discussed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Setup on the vehicle

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

This item is often bought with the above discussed item.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm