Traxxas Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This product praises the above talked about product.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in place
Gray in color, constructed of solidified plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Fastening to skidplate and differential

COMMENTS:
For the 3.3 variation just.

This product praises the main item here.

Shock Rebuild Big Bore/Ultra

This is a shock restore kit for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

You will love this thing if you have the thing just above mentioned.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle carriers and shocks
Black in color, constructed of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation just. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Right here is another product that praises the product being talked about.

A-Arms, For Maxx, 2.5R & 3.3, Blue

These are the RPM Blue A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that replace the stock.

FEATURES:
Blue in color
Plastic construction

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Installation, NOTE-four packages are needed to replace all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

This is a amazing enhancement to the product currently being talked about.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (essential #4922) and the Bulkheads essential #4930
and offers protection to the front differential.

FEATURES:
Skidplate is constructed of high effect formed black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or hard landings from jumps.
Stainless steel mounting plate offers stiff mounting surface.

INCLUDES:
One plastic front skidplate
One stainless-steel mounting plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk device screws
    (not included, use TRAC3277).

Right here is a fantastic product that several others have actually bought at the same time.

3 X 15Mm Counter Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm countersunk screw is needed

CONSISTS OF:
Six 3x15mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

Get this product to boost the one you are reading around.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FEATURES:
Fastens to bulkhead and assists to support axle carriers
Black in color, constructed of solidified plastic

CONSISTS OF:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation just.