Traxxas Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (crucial #4922) and the Bulkheads crucial #4930
and offers defense to the front differential.

FEATURES:
Skidplate is built of high impact molded black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or tough landings from jumps.
Stainless steel mounting plate offers rigid mounting surface.

INCLUDES:
One plastic front skidplate
One stainless-steel mounting plate.

REQUIRES:
Setting up on chassis with four 3x10mm countersunk device screws
    (not consisted of, use TRAC3277).

The listed below item additionally pairs actually well with the item being gone over.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in place
Gray in color, built of hardened plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Fastening to skidplate and differential

REMARKS:
For the 3.3 variation just.

This item is regularly purchased with the above stated item.

Skidplate Rear

This is the Replacement Back Skidplate for the Traxxas T-Maxx
4WD Radio Control Monster Truck.
This rear skidplate bolts below the chassis and helps to
avoid the chassis from getting scratched.

FEATURES:
Replaces damaged rear skidplates.
Constructed of black plastic.

INCLUDES:
One rear skidplate.

REQUIRES:
Bolting to bottom of chassis utilizing 3 3x10mm countersunk device
    screws (not consisted of).

REMARKS:
Maker's website is www.traxxas.com

This item is regularly purchased with the above stated item.

3 X 15Mm Counter Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo beast truck, can likewise be utilized in any
    application where a 3x15mm countersunk screw is required

INCLUDES:
Six 3x15mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

This item is regularly purchased with the above stated item.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel building
Silver in color

INCLUDES:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Here is a great item that many others have bought at the exact same time.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building, blue in color
Locknuts utilized at the chassis and skid plate mounting holes to
    firmly lock bulkheads in place, minimizing the chance of damage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This is a amazing addition to the item currently being gone over.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Resilient steel building

INCLUDES:
8 pins

REQUIRES:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

REMARKS:
These are enough hinge pins for the whole car.