Traxxas Steering Bellcranks Servo Save

This is the replacement Steering Bellcrank Set for the Traxxas
#3905 E-Maxx.
This will likewise work as an upgrade for the Nitro Maxx Series and
the #3906 E-Maxx

FUNCTIONS:
Composite nylon building, black in color
Changes a used or broken bellcrank set

CONSISTS OF:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring Cap
One Servo Saver Spring
2 3x12mm Shoulder Screws (2.5mm hex size)
Six 3x15 Button Head Cap Screws (2mm hex size)
One Black Nylon Spacer
2 White Nylon Spacer

NEEDS:
Assembly and installation following the design manual (a installation
sheet is consisted of for T-Maxx and #3906 E-Maxx installations)

COMMENTS:
If you are installing this bellcrank on any design besides the
#3905 E-Maxx the following items will likewise need to be purchased in
order to install this set - TRAC5116, TRAC2579 and TRAC3642

This is a great enhancement to the item presently being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a fantastic item that numerous others have bought at the very same time.

Alum Bellcrank Posts Threaded

This is a Pair of the Aluminum Bellcrank Posts for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
These bellcrank posts hold the guiding bellcranks to the chassis.
The link connects the guiding bellcrank to the servo saver.

FEATURES:
Stock aluminum guiding bellcranks.
Steering link is steel and rods ends are plastic.

INCLUDES:
2 bellcrank posts
One 3x25mm steering link threaded rod with rod ends

NEEDS:
Positioning bellcranks on posts and attaching posts to chassis.
Attaching steering connect to bellcrank and servo saver.

This item praises the above talked about item.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (vital #4922) and the Bulkheads vital #4930
and supplies security to the front differential.

FEATURES:
Skidplate is built of high impact formed black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or difficult landings from jumps.
Stainless steel mounting plate supplies rigid mounting surface.

INCLUDES:
One plastic front skidplate
One stainless steel mounting plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk device screws
    (not consisted of, use TRAC3277).