Traxxas Alum Bellcrank Posts Threaded

This is a Set of the Aluminum Bellcrank Posts for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
These bellcrank posts hold the guiding bellcranks to the chassis.
The link connects the guiding bellcrank to the servo saver.

FEATURES:
Stock aluminum guiding bellcranks.
Steering link is steel and rods ends are plastic.

INCLUDES:
2 bellcrank posts
One 3x25mm steering link threaded rod with rod ends

REQUIRES:
Positioning bellcranks on posts and attaching posts to chassis.
Attaching steering connect to bellcrank and servo saver.

You will like this item if you have the item above mentioned.

Steering Bellcranks Servo Save

This is the replacement Steering Bellcrank Set for the Traxxas
#3905 E-Maxx.
This will also work as an upgrade for the Nitro Maxx Series and
the #3906 E-Maxx

FEATURES:
Composite nylon building and construction, black in color
Changes a used or damaged bellcrank set

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring Cap
One Servo Saver Spring
2 3x12mm Shoulder Screws (2.5mm hex size)
6 3x15 Button Head Cap Screws (2mm hex size)
One Black Nylon Spacer
2 White Nylon Spacer

REQUIRES:
Assembly and setup following the model manual (a installation
sheet is included for T-Maxx and #3906 E-Maxx setups)

REMARKS:
If you are setting up this bellcrank on any model other than the
#3905 E-Maxx the following items will also need to be purchased in
order to install this set - TRAC5116, TRAC2579 and TRAC3642