Traxxas Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls suit the axle carriers at each wheel
    The pivot ball cap bushings fit in between the pivot balls
and the aluminum caps.

FEATURES:
Changes stock pivot balls and pivot ball cap bushings.
Pivot balls are made from steel, pivot ball cap bushings are made from
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Placing pivot ball cap bushings in between the pivot
    balls and aluminum caps.

This item compliments the main item below.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

NEEDS:
Two plans needed to complete truck

Right here is an additional item that compliments the item being gone over.

O-Ring & Tubing Set: BCP, BCPP, B400


Overview


Inner diameter: 3mm
External diameter: 6mm
Do not use a petroleum-based lubricant such as Vaseline. Rather use a silicone-based lubricant.












The listed below item likewise pairs truly well with the item being gone over.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Building
Black in Color
Permits Oversized Bearing use

CONSISTS OF:
One Left Axle Carrier
One Right Axle Carrier
4 Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Setup

Right here is an additional item that compliments the item being gone over.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outside diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Several others have purchased this item in addition to the item that you are presently reading about.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Fastens to bulkhead and assists to support axle carriers
Black in color, constructed of solidified plastic

CONSISTS OF:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Fastening to chassis

COMMENTS:
For the 3.3 variation only.

This item compliments the main item below.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle carriers and shocks
Black in color, constructed of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Fastening to chassis

COMMENTS:
For the 3.3 variation only. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.