Traxxas Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install attach the body to the
    chassis

CONSISTS OF:
Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw
    pins

REQUIRES:
Setting up on chassis

This product compliments the above discussed product.

Shock Tower

This is the Shock Tower for the all variations of the Traxxas T-Maxx.
This is for rectangle-shaped body posts.

FEATURES:
Plastic building

CONSISTS OF:
(1) Shock Tower

REQUIRES:
Setup

SPECIFICATIONS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Density: 0.323" (8.2mm)

This is a wonderful enhancement to the product currently being discussed.

Ez Start Quick Connector

This is the stock replacement Quick Port set for the Traxxas EZ Start.

FEATURES:
All wires included in an EZ starting system

CONSISTS OF:
One complete Wire Set with connectors
Two zip ties
One adhesive foam pad

REQUIRES:
The rest of the EZ Starting system.

COMMENTS:
This does not include the adapter and box which connects to the
    7.2V battery pack for use on the EZ starting system. (TRAP4580)

Below is an additional product that compliments the product being discussed.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in between the bumper mounts.

FEATURES:
Black nylon building

CONSISTS OF:
Two Bulkhead Cross Braces
8 3x25mm round head screws

REQUIRES:
Setup onto and E-Maxx.

SPECIFICATIONS:
Installing holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Want an additional excellent product to enhance the above discussed product?

F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These mounts attach the bumpers to the bulkheads.

FEATURES:
Black nylon building

CONSISTS OF:
One L&R Front Bumper Mount Set
One L&R Rear Bumper Mount Set
8 3x15mm round head maker screws

REQUIRES:
Nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not provide this part in aluminum. Duratrax provides three
    various colors in aluminum, see stock numbers DTXC2725 - DTXC2732

Regularly gotten with the product that you are currently reviewing.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel building
Phillips drive insert
Countersunk and self-tapping
Replacement parts designed for the Traxxas Nitro Hawk

CONSISTS OF:
(6) Screws

SPECIFICATIONS:
Size: 3mm
Length: 10mm

Get this product to boost the one you read around.

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk maker screws for the Traxxas Nitro Hawk.

FEATURES:
Metal building
Countersunk (flat head) maker screws
Phillips drive insert
Replacement parts designed for the Traxxas Nitro Hawk

CONSISTS OF:
Six Screws

SPECIFICATIONS:
Length: 10mm
Size: 3mm

Get this product to boost the one you read around.

Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for many
Traxxas Vehicles.

FEATURES:
Black steel building
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
Six 3x12x5mm shoulder screws

SPECIFICATIONS:
Length: 12mm (.47")
Size: 3mm (.12")
Thread Length: 5mm (.20")