Traxxas Attachment Screws

    This is a Package of 3x12x5mm Shoulder Screws for lots of
Traxxas Vehicles.

FEATURES:
Black steel building and construction
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
Six 3x12x5mm shoulder screws

SPECS:
Length: 12mm (.47")
Diameter: 3mm (.12")
Thread Length: 5mm (.20")

Get this product to improve the one you read about.

Shock Tower

This is the Shock Tower for the all versions of the Traxxas T-Maxx.
This is for rectangle-shaped body posts.

FEATURES:
Plastic building and construction

CONSISTS OF:
(1) Shock Tower

REQUIRES:
Setup

SPECS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Density: 0.323" (8.2mm)

Right here is a great product that several others have actually bought at the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Frequently gotten with the product that you are currently checking out.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces lie between the bumper mounts.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Bulkhead Cross Braces
8 3x25mm round head screws

REQUIRES:
Setup onto and E-Maxx.

SPECS:
Mounting holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Numerous others have actually gotten this product along with the product that you are currently checking out.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and utilized to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

This product is regularly gotten with the above mentioned product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Frequently gotten with the product that you are currently checking out.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building and construction anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
4 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut driver

SPECS:
Hole Diameter: 4mm
Hex Size: 6mm

This is a great addition to the product currently being discussed.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal building and construction
Black in color

CONSISTS OF:
Six 4 x 12mm Countersunk Flathead Hex Screws

REQUIRES:
Setup on the car

The below product additionally sets truly well with the product being discussed.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97