Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls utilize in the LS II race truck kit.

Kit suches as: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Frequently acquired with the thing that you are currently reviewing.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple change.
2- 2x6,2.5mm thick aluminum spacers

Comment: The spacers are for spacing the ball end away from the transmission
bulkhead.

You will like this thing if you have the thing earlier mentioned.



This is the Motor for the Latrax Rally Car from Traxxas.

FEATURES:
Stock replacement motor

SUCHES AS:
28 turn 370 size Brushed Motor

This thing is frequently acquired with the above stated thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

SUCHES AS:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with adapters

REQUIRES:
Setting up in vehicle

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

You will like this thing if you have the thing earlier mentioned.

Caster Blocks 30 Deg

This is a set of optional caster obstructs for the TRAXXAS TRX-3 2wd electric off
roadway racing buggy.

FEATURES:
Made of white nylon
For 30° caster

SUCHES AS:
One left caster block
One right caster block

COMMENTS:
These castor obstructs mount onto the front A-arms and the steering
blocks mount onto the caster obstructs.

Here is one more thing that praises the thing being gone over.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends attach to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

SUCHES AS:
Six nylon rod ends
Six pivot balls

REQUIRES:
Turnbuckles: TRAC6338

SPECS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

COMMENTS:
Will work just for the Nitro T-Maxx.

Here is a great thing that numerous others have bought at the very same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

Frequently acquired with the thing that you are currently reviewing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

SUCHES AS:
One left and right steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

Here is a great thing that numerous others have bought at the very same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel construction (silver color)

SUCHES AS:
Two (2) turnbuckles

REQUIRES:
Rod ends (TRAC4742)

SPECS:
Length: 82.4mm
Diameter: 3mm

You will like this thing if you have the thing earlier mentioned.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are utilized on the rear end of the truck(rear hubs).

Consists of: 2- 62mm turnbuckles with adjusting nuts.