Traxxas F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These mounts connect the bumpers to the bulkheads.

FEATURES:
Black nylon building and construction

INCLUDES:
One L&R Front Bumper Mount Set
One L&R Back Bumper Mount Set
8 3x15mm round head machine screws

NEEDS:
Absolutely nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not provide this part in aluminum. Duratrax offers 3
    different colors in aluminum, see stock numbers DTXC2725 - DTXC2732

Several others have gotten this item in addition to the item that you are currently reading about.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Several others have gotten this item in addition to the item that you are currently reading about.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Replaces missing or damaged hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and placing wheel hubs in
    recessed location of axle providers (4932).

Often gotten with the item that you are currently reading about.

Turnbckls 106Mm Frnt

These are the Stock Replacement Front Turnbuckles for the Traxxas T-Maxx 2.5.
These are the adjustable connecting rods.

**For the front turnbuckles for the older T-Maxx usage TRAC6338**

FEATURES:
Thicker steel construction.

INCLUDES:
2 turnbuckles with pre-installed rod ends and balls.

REQUIRES:
Absolutely nothing. These are direct replacement rods.

SPECS:
Length: 108mm (4.25")
Thickness: 4mm (0.16")

Here is a fantastic item that lots of others have purchased the very same time.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930
and supplies security to the front differential.

FEATURES:
Skidplate is built of high effect formed black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or tough landings from jumps.
Stainless steel installing plate supplies stiff installing surface.

INCLUDES:
One plastic front skidplate
One stainless steel installing plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk machine screws
    (not included, use TRAC3277).

This item is regularly gotten with the above mentioned item.

RPM Long Body Mount Set (Blue) (2)

These are Long Blue Body mounts.
These are used on the Traxxas T-Maxx and the E-MAXX

FEATURES:
These are plastic long body mounts.

INCLUDES:
2 Blue Shock Body mounts.
One Team RPM sticker.

REQUIRES:
Assembly onto the T-Maxx and E-Maxx

SPECIFICATIONS:
Length: 108.7 mm (4.2")
Size of post: 7mm (.279")

REMARKS:
These are to be used just with the RPM Shock Tower just. For the RPM
blue shock mounts, use RPMC8010.

Here is another item that praises the item being talked about.

Body Mount Posts

This is the Front Body Mount Posts, Back Body Mount and 4 Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install connect the body to the
    chassis

INCLUDES:
2 Front Body Mount Posts Back Body Mount and 4 2.5 x 17mm screw
    pins

NEEDS:
Installing on chassis