Traxxas Ez Start Quick Connector

This is the stock replacement Quick Connector set for the Traxxas EZ Start.

FEATURES:
All wires included in an EZ beginning system

CONSISTS OF:
One total Wire Set with ports
2 zip ties
One adhesive foam pad

REQUIRES:
The remainder of the EZ Beginning system.

COMMENTS:
This does not consist of the connector and box which connects to the
    7.2V battery pack for usage on the EZ beginning system. (TRAP4580)

Several others have actually bought this thing along with the thing that you are presently reviewing.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Perfect for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Suited for the different throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

This is a fantastic addition to the thing presently being discussed.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
2 bundles had to finish truck

You will enjoy this item if you have the item earlier stated.

Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and mount connect the body to the
    chassis

CONSISTS OF:
2 Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw
    pins

REQUIRES:
Installing on chassis

Here is one more thing that praises the thing being discussed.

Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls utilize in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

This thing praises the above discussed thing.

Stub Axle Carriers (2) Rqrs 5X11x4mm Bb

This is a pair of Stub Axle Carriers
for the Traxxas Outlaw, Stampede and Rustler VXL.

FEATURES:
Formed nylon building and construction (black)

CONSISTS OF:
2 stub axle providers

REQUIRES:
Installation on the automobile

Several others have actually bought this thing along with the thing that you are presently reviewing.

Flywheel

This is the aluminum 2-pin flywheel used on the Traxxas Stampede truck.

INCLUDES:
(1) Aluminum 2-pin flywheel

SPECS:
diameter - 32mm
width - 6mm JAL 12/5/96

Also fits the Nitro Sport. updateaxy2/21/98

Here is one more thing that praises the thing being discussed.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel building and construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts designed for the Traxxas Nitro Hawk

CONSISTS OF:
(6) Screws

SPECS:
Size: 3mm
Length: 10mm

This thing praises the main item below.

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk device screws for the Traxxas Nitro Hawk.

FEATURES:
Metal building and construction
Countersunk (flat head) device screws
Phillips drive insert
Replacement parts designed for the Traxxas Nitro Hawk

CONSISTS OF:
Six Screws

SPECS:
Length: 10mm
Size: 3mm