RPM Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend construction, black in color
Locknuts utilized at the chassis and skid plate mounting holes to
    firmly lock bulkheads in location, decreasing the opportunity of breakage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This product is frequently gotten with the above discussed product.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Durable steel construction

CONSISTS OF:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

REMARKS:
These are enough hinge pins for the entire car.

Lots of others have actually gotten this product in addition to the product that you are currently checking out.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic construction

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Setup, NOTE-four plans are needed to change all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Thickness: 0.33" (8.4mm)

This product is frequently gotten with the above discussed product.

Rear Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Back Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend construction, black in color
Locknuts utilized at the chassis and skid plate mounting holes to
    firmly lock bulkheads in location, decreasing the opportunity of breakage

CONSISTS OF:
One each Left and Right Rear Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This product praises the main item right here.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential equipment or the spur gear.

PACKAGE
CONSISTS OF: 2 notched rings

You will love this product if you have the product earlier mentioned.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES:
Made of RULON

CONSISTS OF:
Twelve pegs ***Colors might differ from picture***

SPECS:
length - 3.5mm
diameter - 3mm

REMARKS:
These pegs go in the holes on the side of the spur equipment.

Right here is a excellent product that many others have actually purchased the same time.

70T Spur Gear 32P

This is the spur equipment (or primary equipment) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth equipment

Functions: Hard nylon construction
Drilled for light weight

Specs: Teeth-70
Pitch-32

Requires: Absolutely nothing, this is a direct replacement part.

Comments: This is the very same equipment that is available in the truck package.

2/10/97
AST