Traxxas Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
CONSISTS OF: Two notched rings

Get this thing to improve the one you read around.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FUNCTIONS:
Made from RULON

CONSISTS OF:
Twelve pegs ***Colors might vary from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Numerous others have actually bought this thing in addition to the thing that you are presently reviewing.

70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Difficult nylon building and construction
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Requires: Absolutely nothing, this is a direct replacement part.

Comments: This is the same gear that can be found in the truck package.

2/10/97
AST

This thing is frequently bought with the above stated thing.

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch style spur gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that make up the slipper clutch are:
    #1994 - stress spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - top gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

You will enjoy this thing if you have the thing just above mentioned.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon mix building and construction, black in color
Locknuts used at the chassis and skid plate mounting holes to
    safely lock bulkheads in location, reducing the possibility of breakage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

Below is a great thing that lots of others have actually bought at the very same time.

Slipper Tension Spring

This is the replacement slipper stress spring set for the Traxxas sets that
have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

PLAN
CONSISTS OF:
Slipper stress spring (1)
Stimulate gear bushing (1) -- white
4mm Locknut with nylon insert (1)

This thing praises the main item right here.

Slipper Pressure Plate (1)

This is a replacement parts set for the Traxxas Rad2, Hawk2, Nitro Hawk,
Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.

This Plan Consists of:
(1) Slipper (or differential) pressure plate

JBN 1.25.94 *8)