Traxxas 32 Pitch Pinion Gear 18T

This is a Traxxas 18 Tooth Pinion Gear for a 5mm Motor Shaft.

FEATURES:
Silver in color
Metal building and construction

CONSISTS OF:
(1) 18 Tooth Pinion Gear
(1) One 4mmx3.5mm set screw

REQUIRES:
Installation on motor shaft

SPECIFICATIONS:
Outer Size: 15.5mm (0.61")
Inner Size: 5mm (0.20")

This product praises the above discussed product.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity security makes it impossible to connect in reverse
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
One black female plastic adapter
One black male plastic adapter
2 sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Below is an additional product that praises the product being discussed.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Totally put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping sections from dirt
Connects to the differential with one screw pin
Functions on the front or rear, right or left of automobile

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

REQUIRES:
Setting up on chassis