Traxxas 70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon building
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Requires: Absolutely nothing, this is a direct replacement part.

Comments: This is the exact same gear that comes in the truck kit.

2/10/97
AST

Get this product to improve the one you read around.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES:
Made from RULON

INCLUDES:
Twelve pegs ***Colors may differ from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs go in the holes on the side of the spur gear.

Right here is one more product that compliments the product being reviewed.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: 2 notched rings

Want one more wonderful product to compliment the above discussed product?

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design stimulate gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that comprise the slipper clutch are:
    #1994 - stress spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - leading gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

Several others have actually acquired this product in addition to the product that you are presently reviewing.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Matched for the varied throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

The below product likewise pairs really well with the product being reviewed.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, decreasing the possibility of breakage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws