Traxxas Clutch Shoes W/Spring Hvy Duty

These are Replacement Clutch Shoes for the Traxxas T-Maxx.
These mount to the flywheel and engage the clutch.

FEATURES:
Carbon Construction
Black in Color

CONSISTS OF:
Two Clutch Shoes
One Spring

NEEDS:
Assembly into the clutch system.

Frequently gotten with the item that you are presently checking out.

Ball Bearing 5 X 11Mm (2)

These are 5 x 11 x 4mm Ball Bearings from Traxxas.

FEATURES:
Ball bearings reduce friction and last longer than bushings.
Chrome steel construction.
Used to update from bushings.

INCLUDES:
Two 5 x 11mm bearings

SPECIFICATIONS:
Inner Size: 5mm
Outer Size: 11mm
Density: 4mm

COMMENTS:
To tidy bearings use DTXC2458 Power Shot Cleaner

This item praises the above discussed item.

Alum Exhaust Header 2.5 Or 2.5R Revo

This is the Aluminum Exhaust Header for the Traxxas Revo.

FEATURES:
Aluminum building and construction
Silver in color
Fluted on tuned pipe end for better silicone coupler connection
Heatsink engine mounting flange

CONSISTS OF:
One Exhaust Header

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Length: 59mm (2.32")
Pipe diameters: Outside-13mm (.52")
Inside -10mm (.40")
Width between engine exhaust mount holes: 22mm (.866")

COMMENTS:
If needed, engine/header mounting screws, use TRAG5142.

Several others have gotten this item along with the item that you are presently checking out.

O-Ring & Seal Set For 2.5 Carb

This is an O-Ring and Seal Set for the TRX 2.5 Engine.

FEATURES:
Total seal and ring set.
Black, blue and red rubber construction.
Brass ring setup tools.

INCLUDES:
Two brass ring setup tools.
One blue rubber carburetor level seal.
Two silver 5.3x7.8x0.6mm crush washers.
Two large 13x1mm red rubber o-rings.
4 10x1mm red rubber o-rings.
Two 2.5x1.15mm black rubber o-rings.
Three 2x1mm black rubber o-rings.
One setup diagram.

REQUIRES:
Changing existing o-rings

COMMENTS:
This replacement set is designed for the 2.5 engine by Traxxas just.

You will love this thing if you have the thing just above mentioned.

E Clips/ C Rings

This is a assortment of e-clips, c-clips, and body clips for the Traxxas line
of automobiles and trucks.
INCLUDES:
28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,
4 of the shock C-clips and 3 body clips.

This item praises the above discussed item.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel building and construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts designed for the Traxxas Nitro Hawk

CONSISTS OF:
(6) Screws

SPECIFICATIONS:
Size: 3mm
Length: 10mm

Want another terrific item to enhance the above stated item?

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk device screws for the Traxxas Nitro Hawk.

FEATURES:
Metal building and construction
Countersunk (flat head) device screws
Phillips drive insert
Replacement parts designed for the Traxxas Nitro Hawk

CONSISTS OF:
6 Screws

SPECIFICATIONS:
Length: 10mm
Size: 3mm