Traxxas Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made of metal(probably with a low
amount of steel).

CONSISTS OF:
4- planetary gears
4- planteary gear shafts
2- sun gears
1- sun gear positioning shaft

WAJ
1/16/94

Get this product to enhance the one you read around.

Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Bandit, Rustler, 2WD Stampede, 2WD Slash
and Monster Jam Cars

FUNCTIONS:
CNC aluminum construction diff case, black in color
Hardened steel gear
Sealed differentials allows tuning to track conditions by changing
    weight of diff oil
Four O-rings assist seal versus fluid leak
Thirty day limited service warranty starting at date of purchase- valid
    in the United States just

CONSISTS OF:
Sealed Differential Case
Four O-Rings
2 Screws

SPECIFICATIONS:
Outdoors Diameter: 1.48" (37.5mm)
Shaft Diameter: .200" (5.10mm)
Total Thickness: 0834" (21.2mm)

Numerous others have bought this product in addition to the product that you are presently reading about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel construction
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

REMARKS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

Below is an additional product that praises the product being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly enjoy this product if you have the product above pointed out.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

This product is often bought with the above discussed product.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Bandit, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Lightweight carbon fiber composite transmission case
Longer motor mounting slots for more gear ratio combinations
CNC 6061 aluminum motor plate, heat sink and arm install
Larger open area for a larger motor heat sink
Thirty day limited service warranty starting at date of purchase-valid
    in the United States just

CONSISTS OF:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Regularly bought with the product that you are presently reading about.

Main Diff W/ Steel Ring Gear/ Side Cover Plate/ Sc Rews (Ban

This is the Main Diff with Steel Ring Gear from Traxxas
for the Bandit, Stampede and Rustler VXL series.

Includes: Main diff with steel ring gear
Side cover plate
Screws
Directions

Needs: Setup on the automobile

Numerous others have bought this product in addition to the product that you are presently reading about.

Steel Top Drive Gear 22T

This is the 22 tooth, solidified steel top drive gear that fits several Traxxas
cars. .
Consists of: 1 gear just