Hot Racing Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Bandit, Rustler, 2WD Stampede, 2WD Slash
and Beast Jam Vehicles

FEATURES:
CNC aluminum construction diff case, black in color
Hardened steel gear
Sealed differentials enables tuning to track conditions by altering
    weight of diff oil
4 O-rings assist seal versus fluid leak
Thirty day minimal service warranty beginning at date of purchase- valid
    in the United States only

INCLUDES:
Sealed Differential Case
4 O-Rings
Two Screws

SPECS:
Outdoors Size: 1.48" (37.5mm)
Shaft Size: .200" (5.10mm)
General Density: 0834" (21.2mm)

Right here is a terrific item that lots of others have actually purchased the exact same time.

Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FEATURES:
All these equipments and shafts are made of metal(most likely with a low
quantity of steel).

INCLUDES:
4- planetary equipments
4- planteary gear shafts
2- sun equipments
1- sun gear alignment shaft

WAJ
1/16/94

Right here is a terrific item that lots of others have actually purchased the exact same time.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the standard and XL variation of the Rustler
or Stampede.

Frequently acquired with the item that you are presently reading about.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Bandit, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Lightweight carbon fiber composite transmission case
Longer motor mounting slots for more gear ratio mixes
CNC 6061 aluminum motor plate, heat sink and arm mount
Larger open location for a bigger motor heat sink
Thirty day minimal service warranty beginning at date of purchase-valid
    in the United States only

INCLUDES:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Numerous others have actually acquired this item along with the item that you are presently reading about.

Silicone Diff Fluid 60,000 Cst, 2Oz

This is the Factory Group 60,000cst Diff Fluid from Associated.
This can be used in any application that needs diff fluid.

FEATURES:
Custom blend silicone
Clear liquid
Bottle consists of 2oz (59ml) of fluid

INCLUDES:
One 2oz (59ml) bottle of 60,000cst diff fluid

Numerous others have actually acquired this item along with the item that you are presently reading about.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This item praises the main item here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

Get this item to enhance the one you read about.

Oil Differential 500K Weight

    This is the 500K Weight Differential Oil from Traxxas.

FEATURES:
Lubes differential
Clear in color
500K weight

INCLUDES:
One .70oz (20cc) Bottle Of 500K Diff Lube

REQUIRES:
Application to differential