Traxxas Steering Bellcranks E/T Maxx

    This is a Set of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
These bellcranks bolt to the chassis and the bellcrank posts connect
to the steering turnbuckles.

FEATURES:
Changes stock steering bellcranks.
All components are plastic, except for the shoulder screws which are
    steel.

INCLUDES:
2 steering bellcranks
Four 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Connecting bellcranks to the chassis and attaching drag connect to the
    steering turnbuckles.

Many others have acquired this thing in addition to the thing that you are presently reading about.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FUNCTIONS:
Attaches to and secures chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless-steel plate

REQUIRES:
Setting up on chassis with 4 3x12mm countersunk device screws
    (not consisted of, utilize TRAC2552

REMARKS:
For the 3.3 variation only. For the initial T-Maxx Skidplate, order
    TRAC4037.

This is a superb addition to the thing presently being reviewed.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Long lasting steel construction

INCLUDES:
Eight pins

REQUIRES:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

REMARKS:
These suffice hinge pins for the entire vehicle.

Right here is one more thing that compliments the thing being reviewed.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon mix construction, blue in color
Locknuts utilized at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, minimizing the chance of breakage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws