Traxxas Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FEATURES:
Connect to and safeguards chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

NEEDS:
Setting up on chassis with 4 3x12mm countersunk maker screws
    (not included, use TRAC2552

REMARKS:
For the 3.3 variation only. For the original T-Maxx Skidplate, order
    TRAC4037.

Often acquired with the product that you are currently checking out.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in place
Gray in color, built of hardened plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Fastening to skidplate and differential

REMARKS:
For the 3.3 variation only.

Often acquired with the product that you are currently checking out.

Skidplate Rr Grey

This is the Back Plastic Skidplate for the T-Maxx 3.3.

FEATURES:
Connect to and safeguards chassis and supports the rear bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

NEEDS:
Setting up on chassis with 4 3x12mm countersunk maker screws
    (not included, use TRAC2552)

REMARKS:
For the 3.3 variation only. For the original T-Maxx Skidplate, order
    TRAC4074.

You will certainly like this item if you have the item previously discussed.

Steering Bellcranks E/T Maxx

    This is a Pair of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
These bellcranks bolt to the chassis and the bellcrank posts link
to the guiding turnbuckles.

FEATURES:
Replaces stock guiding bellcranks.
All parts are plastic, other than for the shoulder screws which are
    steel.

INCLUDES:
2 guiding bellcranks
Four 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Connecting bellcranks to the chassis and connecting drag link to the
    guiding turnbuckles.

Numerous others have acquired this product in addition to the product that you are currently checking out.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Replaces missing out on or damaged hex wheel hubs
Hubs are made from molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and placing wheel hubs in
    recessed location of axle providers (4932).

This is a wonderful enhancement to the product currently being discussed.

F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These mounts connect the bumpers to the bulkheads.

FEATURES:
Black nylon building

INCLUDES:
One L&R Front Bumper Mount Set
One L&R Back Bumper Mount Set
Eight 3x15mm round head maker screws

NEEDS:
Nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not provide this part in aluminum. Duratrax provides 3
    various colors in aluminum, see stock numbers DTXC2725 - DTXC2732