Traxxas Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FEATURES:
Nylon building, gray in color
Replaces worn or broken chassis

INCLUDES:
One long wheelbase chassis

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)

This item compliments the above reviewed item.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
Replaces worn or harmed lower chassis braces

INCLUDES:
Right and left lower chassis braces

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Density: .43" (11mm)

Below is an additional item that compliments the item being reviewed.

Skid Plate Gray E-Maxx

This is the Transmission Skid Plate
for the Traxxas E-Maxx.

FEATURES:
Gray nylon building

INCLUDES:
One nylon transmission skid plate

REQUIRES:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 4.60" (117mm)
Width: 2.40" (61mm)

This item compliments the main item right here.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (crucial #4922) and the Bulkheads crucial #4930
and provides protection to the front differential.

FEATURES:
Skidplate is constructed of high effect molded black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or difficult landings from jumps.
Stainless steel installing plate provides stiff installing surface.

INCLUDES:
One plastic front skidplate
One stainless steel installing plate.

REQUIRES:
Installing on chassis with four 3x10mm countersunk device screws
    (not included, utilize TRAC3277).

Frequently gotten with the item that you are presently checking out.

3 X 12Mm Cntrsnk Machine Screw (6)

This is a plan of six 3x12mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can also be utilized in any
    application where a 3x12mm countersunk screw is required

INCLUDES:
6 3x12mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 12mm
Size: 3mm

Want an additional excellent item to compliment the above stated item?



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Perfect upgrade for radios found in RTR vehicles
Throttle and guiding trim and reverse
Steering double rate dial
Throttle end point adjustment
Channel three switch
Throttle fail safe
One year minimal warranty through Hobby Solutions starting at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Instruction
    Manual and On/Off Switch

REQUIRES:
Servos of modeler's option
Four AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: Four AA cells
Current Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work appropriately when other kind of battery is utilized

COMMENTS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
    digital servos including the BLS series and most peripheral
    devices such as brushless ESCs