Traxxas E-Revo Body Prographix

    This is a PROGRAPHIX Body for the Traxxas E-Revo
Covers and Secures the Vehicle.

FEATURES:
Lexan construction
Pre-painted graphics
Body mount holes pre-drilled
Pre-cut
Protective movie covers beyond body after finish and is gotten rid of
    after completion of paint task

INCLUDES:
One painted graphics E-Revo Body
One decal set

REQUIRES:
Lexan safe spray or brush-on paint
Traxxas E-Revo

SPECIFICATIONS:
Length: 500mm (19.7")
Width: 185mm (7.28")
Height: 125mm (4.92")

REMARK:
Graphics are pre-painted. Requires paint and final
decal application.

This item praises the main item below.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Fully assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping areas from dirt
Attaches to the differential with one screw pin
Functions on the front or rear, right or left of automobile

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

REQUIRES:
Installing on chassis

Numerous others have actually acquired this item in addition to the item that you are presently reading about.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for usage on the E-Revo

FUNCTIONS:
Stainless-steel bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside diameter: 6mm (0.24")
Outdoors diameter: 13mm (0.51")
Width: 5mm (0.20")

Numerous others have actually acquired this item in addition to the item that you are presently reading about.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Guideline sheet

REQUIRES:
Two plans had to complete truck

Below is a fantastic item that many others have actually purchased the exact same time.



Functions
Ideal for high-stress 1/4 scale/giant scale models
strong and long lasting

Specs
Linkages: Control Horns
Material : Metal
Thread Size: 8-32

Want another fantastic item to enhance the above discussed item?



Below is another item that praises the item being talked about.

Titanium Pro-Links 4-40x4-1/2" (2)

Specs
Hardware: Turnbuckles/Pro-Links
Hardware Length : 2" - 5"
Material : Metal
Thread Size: 4-40

Want another fantastic item to enhance the above discussed item?

Yokes Diff/Tranny

These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3. TRAC78**

FUNCTIONS:
Black plastic construction

INCLUDES:
Two drive yokes
Two 4x15mm Yoke pins

REQUIRES:
T-Maxx 3.3

SPECIFICATIONS:
Length: 15/16" (23mm)
Diameter: 3/4" (17mm)

You will certainly love this thing if you have the thing above discussed.

Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

INCLUDES:
Front bulkhead cuts in half Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

Want another fantastic item to enhance the above discussed item?

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Building and construction
Black in Color
Enables Oversized Bearing utilize

INCLUDES:
One Left Axle Carrier
One Right Axle Carrier
Four Dust Boot Retainers
Two Bearing Spacers

REQUIRES:
Installation